Pi haters get the rope

friend was pooping on this : https://i.rdrama.net/images/17237435389962277.webp

(reasonable)

https://geekworm.com/products/x1009

was talking about how its probably better to go this route than use the Argon Eon I just set up

40
Jump in the discussion.

No email address required.

:yawn: they were cool until they started charging a premium

Jump in the discussion.

No email address required.

the Pi zero (4core) is still 16 bucks and a really good buy, the OG single core is only 8$

Jump in the discussion.

No email address required.

$61 for a PCB with some ports :marseylaugh:

Jump in the discussion.

No email address required.

The Pi was great when it was like $35. Now if you want something that's actually usable it's over $100 and you have to assemble it yourself, at that point just spend a little bit more and get a more powerful x86 mini PC that you can just unbox, plug in, and use.

Jump in the discussion.

No email address required.

I will reiterate my frustration.

See, 3d printer owners are neurodivergent. As a result, we have a lot of old computers laying around.

Using a Raspberry Pi to control a 3D printer is very common practice. What's shockingly uncommon is using a spare computer to do exactly the same thing, especially given the Pi shortage at the height of 3D printering acceleration.

Holy heck was it a headache getting Octoprint running on a spare computer, following a guide on how to do exactly that, using a distro that's branded as 'The desktop version of a Raspberry Pi'. Like, a guide linked straight from octoprint.org. I still can't get Octoprint to launch on startup.

Jump in the discussion.

No email address required.

I am having a hard time believing that 3d printing causes the shortage when rpi admitted that at the time of the shortage they were prioritizing corporate buyers

Jump in the discussion.

No email address required.

I didn't say that.

I'm saying that logically, a shortage of Rpis should've normalized using spare computers when people couldn't get their Rpi.

The pi shortage and 3d printing becoming more common were partially coincidence, partially fueled by covid -- more people staying home and taking up the hobby or printing shit they couldn't get normally

Jump in the discussion.

No email address required.

Anecdotally I used my PC to run my printer, I had so many issues with my PC resetting randomly and leaving the printer frozen with the hotend still on.

but I agree that people should get more accustomed to using spare PCs instead of coonsuming

Jump in the discussion.

No email address required.

I had the same issue running Octo4a. It'd randomly pause mid-print, creating tons of artifacts.

Just, you know, my father in law gave me some run-of-the-mill AiO PC. Using it to run Octoprint just made sense to me -- it's free, it's a small footprint, it's just the right amount of power, and it has a native display.

Also lmao i switched to YouTube to get this screenshot then forgot all about this and returned to doing my actual job

https://i.rdrama.net/images/1723760024885206.webp

Jump in the discussion.

No email address required.

People just want a computer that can attach to their printer and doesn't need a separate power supply

Jump in the discussion.

No email address required.

I suppose that may be a factor -- a lot of 3d printer enthusiasts also being poors and college kids, so they have limited space and receptacles available to them

Jump in the discussion.

No email address required.

For real you can get a chink PC with like an N100 or a ryzen 3 for $150 and it's way more powerful than even the best Pi

Jump in the discussion.

No email address required.

drop some model numbers king

Jump in the discussion.

No email address required.

beelink mini

Jump in the discussion.

No email address required.

I can't tell you a number off of my head but some chink brands I see often are Aoostar, Firebat, Acemagic, T Bao. There's a lot tbh I'm not sure they're really different brands probably just different store fronts depending on the country they're selling

Only thing is you absolutely have to inspect the BIOS and do a clean install of whatever OS you need because chinese PCs are full of spyware

Jump in the discussion.

No email address required.

Don't buy a chink brand.

Jump in the discussion.

No email address required.

As a main computer, sure. But for the kind of stuff you'd do with a Rasperry? Who cares honestly.

Jump in the discussion.

No email address required.

:marseyhes#right:

If you want to do GPIO things it's cool but a cheap x86 box runs circles around an Rpi due to I/O alone.

Jump in the discussion.

No email address required.

Don't forget you can buy rpi stock on the lse now. The market cap is only 800 bong millions so it can easily 10x.

Jump in the discussion.

No email address required.

Are they still impossible to buy?

Jump in the discussion.

No email address required.

https://rpilocator.com/?country=US

it used to be this list was completly empty

Jump in the discussion.

No email address required.

not really

Jump in the discussion.

No email address required.

:#marseyhesright:

Jump in the discussion.

No email address required.

it's alright. I think the world would be a better place if you could just upcycle any old phone as a raspberry pi type of single board computer.

I use my pinephone as a router. Pretty decent when you realize it has its own battery, display, and cell modem just in case you have to change router settings or the power goes out

Jump in the discussion.

No email address required.

The pi sucks as an always-on server, had multiple sd cards die causing lost data :marseysad:

They're great for GPIO stuff 'n shieet.

Jump in the discussion.

No email address required.

booting from m.2 NVME is very fast and cool

Jump in the discussion.

No email address required.

...can you boot from NVME without USB?

Jump in the discussion.

No email address required.

Yeah, pi5 added the pcie "slot" enabling some very cool features.

Jump in the discussion.

No email address required.

I like Pis (have multiple) but the 5 is in a weird place pricewise

Jump in the discussion.

No email address required.

Who hates RPIs?

Jump in the discussion.

No email address required.

ESP8266 is more than enough for what you want to do yet you cute twinks insist on putting a full blown OS on everything

Jump in the discussion.

No email address required.

I'm going to be a basic b-word, buy the new pi and make a nas out of it, 100%


Putting the :e: in spookie turkey

Jump in the discussion.

No email address required.

Personally I like the Radxa Rock which is just a beefed up chinese RPi.

Jump in the discussion.

No email address required.

Need to try that out, the main reason i usually go pi is because more people use them so usually stuff works first try

Jump in the discussion.

No email address required.

That is true, I recently got a Rock 5C which is brand new, support is pretty lacking. There's some minor differences between the Rock 5B which is old enough to have quite a bit of support. But I did manage to get it setup as my Jellyfin server. It can transcode 4 4k streams at once which is pretty nice for a ~$80 device.

Jump in the discussion.

No email address required.

I had a some pi file server set up for a while but I realised you can get something with much better specs by just buying some second hand office PC for €50. You can work with x86 too then, ARM is a bit of a pain sometimes.

Jump in the discussion.

No email address required.

https://i.rdrama.net/images/1723925603932027.webp

@MARFAN_EATS_DOODOO bet Jewish Lives Matter is responsible for Pis being grossly overpriced now!

Jump in the discussion.

No email address required.

that's a berry not a pie dingus

Jump in the discussion.

No email address required.

>raspberry pis are $60 now

Explain.

Jump in the discussion.

No email address required.

Pi zero is 8-16$, explain

Jump in the discussion.

No email address required.

The two immutable laws of software forking:

1. They will attempt to incorporate rust

2. The solution to the problem is not rust

Snapshots:

https://geekworm.com/products/x1009:

Jump in the discussion.

No email address required.

Link copied to clipboard
Action successful!
Error, please refresh the page and try again.